http ota upgrade for ESP8266

作者: shaneZhang 分类: IOT物联网 发布时间: 2020-08-02 22:17
#include <Arduino.h>

#include <ESP8266WiFi.h>
#include <ESP8266WiFiMulti.h>

#include <ESP8266HTTPClient.h>
#include <ESP8266httpUpdate.h>

#ifndef APSSID
#define APSSID "APSSID"
#define APPSK  "APPSK"
#endif

ESP8266WiFiMulti WiFiMulti;

void setup() {

  Serial.begin(115200);
  // Serial.setDebugOutput(true);

  Serial.println();
  Serial.println();
  Serial.println();

  for (uint8_t t = 4; t > 0; t--) {
    Serial.printf("[SETUP] WAIT %d...\n", t);
    Serial.flush();
    delay(1000);
  }

  WiFi.mode(WIFI_STA);
  WiFiMulti.addAP(APSSID, APPSK);


}

void update_started() {
  Serial.println("CALLBACK:  HTTP update process started");
}

void update_finished() {
  Serial.println("CALLBACK:  HTTP update process finished");
}

void update_progress(int cur, int total) {
  Serial.printf("CALLBACK:  HTTP update process at %d of %d bytes...\n", cur, total);
}

void update_error(int err) {
  Serial.printf("CALLBACK:  HTTP update fatal error code %d\n", err);
}


void loop() {
  // wait for WiFi connection
  if ((WiFiMulti.run() == WL_CONNECTED)) {

    WiFiClient client;

    // The line below is optional. It can be used to blink the LED on the board during flashing
    // The LED will be on during download of one buffer of data from the network. The LED will
    // be off during writing that buffer to flash
    // On a good connection the LED should flash regularly. On a bad connection the LED will be
    // on much longer than it will be off. Other pins than LED_BUILTIN may be used. The second
    // value is used to put the LED on. If the LED is on with HIGH, that value should be passed
    ESPhttpUpdate.setLedPin(LED_BUILTIN, LOW);

    // Add optional callback notifiers
    ESPhttpUpdate.onStart(update_started);
    ESPhttpUpdate.onEnd(update_finished);
    ESPhttpUpdate.onProgress(update_progress);
    ESPhttpUpdate.onError(update_error);

    t_httpUpdate_return ret = ESPhttpUpdate.update(client, "http://server/file.bin");
    // Or:
    //t_httpUpdate_return ret = ESPhttpUpdate.update(client, "server", 80, "file.bin");

    switch (ret) {
      case HTTP_UPDATE_FAILED:
        Serial.printf("HTTP_UPDATE_FAILD Error (%d): %s\n", ESPhttpUpdate.getLastError(), ESPhttpUpdate.getLastErrorString().c_str());
        break;

      case HTTP_UPDATE_NO_UPDATES:
        Serial.println("HTTP_UPDATE_NO_UPDATES");
        break;

      case HTTP_UPDATE_OK:
        Serial.println("HTTP_UPDATE_OK");
        break;
    }
  }
}

本页面支持繁体中文友好显示:http ota upgrade for ESP8266

如果觉得我的文章对您有用,请随意打赏。如果有其他问题请联系博主QQ(909491009)或者下方留言!

发表评论

电子邮件地址不会被公开。 必填项已用*标注